SD8 bulldozer with engine power 335hp

Manufactured according to original drawing of Caterpillar Inc. U.S.A, Total interchangeable with Caterpillar bulldozer.

SD8 is elevated sprocket, track-type bulldozer. Its undercarriage system is elastic suspended, elevated sprocket, hydraulic direct drive, and hydraulic controls. SD8 dozer can be equipped with S-blade, single shank ripper. Main structure uses high strength plate and is suitable for working in stony, worse earth condition. The cab is installed Rops device and comfortable seat.

Operating weight(not including ripper): 40000 kgs
Ripper weight: 4300 kgs
Engine flywheel power/RPM: 246 kw(335HP)/1900r/min
Track ground contact length: 3280 mm
Ground pressure(without ripper): 105 kPa
Track contact length: 2200 mm
Overall dimensions(L?x W x H): 8090?x 4172 x 3952(with single shank ripper)
Gradeability: latitude30degrees transverse 25degrees
Ground clearance: 485mm
Theory travel speed (km/h)
1st gear forward 0-3.9 1st gear backward 0-4.8
2nd gear forward 0-6.8 2nd gear backward 0-8.4
3rd gear forward 0-11.9 3rd gear backward 0-14.8
Dozing operating rate (moving distance 40m ) 452m 3 /h

Model:NTA855-C400 (BC? )
Type: water cooled, single line, four strokes, turbocharged, 6-cylinders, diameter 140mm
Rated speed: 1900r/min
Flywheel power: 246kw(335HP)
Torque storage coefficient: 24.5%
Start mode: 24v electric starting

Power separating, hydraulic-mechanic drive, single stage torque converter is used in SD8 elevale sprocket bulldozer.

It integrates center drive, transmission and speed changing control valve into one component. It can be assembled or disassembled as assembly or as a part. It is very convenient to service. Transmission is multi-stage planetary drive to realize modular assembling and disassembling. Gear the shift can be changed among 1st gear, 2nd gear, 3rd gear forward or reverse rapidly, through multi-functional control valve.

Steering and braking clutch are adjustment-free, oil-type, multi-disc clutch. The braking clutch is pressed by spring, separated hydraulicly, constant meshed type. Steering clutch is hydraulic pressed, non-constant engaged clutch. Steering and braking acts simultaneously, operated manually to realize steering slowly, sharply and braking. The braking of entire machine can be realized through the pedal. Braking rod is designed to keep the undercarriage system in braking condition and guarantee the machine not to slip on slope when starting the engine.

Final drive is two-stage planetary reduction gear mechanism. It is mounted at outside of steering and braking clutch. Combined sprocket segment is very convenient for assembling, disassembling and service.

SD8 dozer utilizes elastic-mounted undercarriage. The track is triangle shape. The sprocket is elevated. Through floating function of continuous auxiliary suspension device, the machine can travel near obstacle on the ground to improve travelling stability and comfortable of the driver. Ground contact area is increased. Performance of travelling and traction is raised.

The cab is hexagonal thin wall box-type structure. Glass is mounted at six sides with wide viewing range. Pulling and pushing glass is mounted at back side. Air conditioner can be installed according to the requirement of customer. The structure of Rops is rigid. It can protect the driver efficiently when the bulldozer is in special condition. Adjustable operator' s seat bias to right 15?degrees and fuel tank, engine hood, track are tilting, the driver can has a good front and rear sighting range.

Implement hydraulic system can control lifting, lowering and tilting of the blade. It also can control the moving of ripper. It mainly consists of oil pump, cylinder, valve group, oil tank line and controlling parts. Implement pump is two group vane type pump. The main specification is as following:
Front pump:Displacement: 129ml/r
Rated pressure:21MPa
Rated speed:2000r/min
Rear pump: Displacement 56ml/r
Rated pressure:21MPa
Rated speed:2000r/min
Rated operation pressure of blade lifting system:17.5MPa
Rated operation pressure of tilting system: 18.3MPa

It is composed of oil pump, transmission control valve, steering and braking control valve, sequence valve, torque converter outlet relief valve, filler and oil line, etc. Main pump is three group gear pump. The main performance is as following:
Lubricating pump: Rated displacement: 90 ml/r
Rated pressure:0.4 MPa
Rated speed: 2000r/min
Working pump: Rated displacement: 115 ml/r
Rated pressure: 3.1? MPa
Rated speed: 2000 r/min
Oil draining pump:Rated displacemen: 160 m/r
Rated pressure: 0.5 MPa
Rated speed: 2000 r/min

Fuel tank: 753L
Water tank and diesel engine cooling water: 125L
Camshaft case of diesel engine: 47L
Bevel gear case hydraulic system of tractor: 167L
Final drive (one side):23L
Rear seat buffer spring case (each side): 30L
Pivot lubricating: 13L
Implement system oil tank:89L

Type Height Width Capacity
s-blade 1765mm 4172 mm 13.0 m 3

Type: single, adjustable hydraulic ripper
Rippering angle: 45?degrees
Max. penetration: 1150mm
Max. lifting height: 830mm